| |
We are proud to present the E2300 Universal Pillar, an original
design with unique features, which is setting the industry standard.
Features of E2300 Universal Pillars:
-
|
A finished pillar less than half the size above ground of comparable capacity pillars.
|
-
|
Innovative base design provides maximum stability in any ground condition.
|
-
|
Because of the unique modular design, all elliptical compression and lug connection
work can be done above ground after the base is installed.
The main connections are housed safely within the rear cavity of the terminal unit.
|
-
|
Unique design enables much easier access and safety for post installation operation.
The main connections are housed safely within the rear cavity of the terminal unit.
Complete access can be gained at any time by simply sliding the terminal unit forward.
|
-
|
Under vehicle impact, the lid and terminal detach from the base as one unit. The
looped tails allow the electrical connections to remain safely housed within the lid,
helping to protect against electrocution.
|
-
|
Modular design allows flexibility for future upgrade without the need to remove the
ground buried base unit.
|
-
|
Graphics - are available in colour or black and white to provide long term warning
notices or for information.
|
| - |
Security locking: The E2300 can easily be fitted with a special padlock arrangement to prevent unauthorised removal of the lid. Special head security screws can also be supplied. (These have a centre post and required a special driver).
|
| HEIGHT: |
Overall:
Standard Lid:
|
970 mm
520 mm Above Ground Level
|
| FOOT PRINT: |
Base Area:
Lid:
|
375 x 400 mm
265 x 300 mm
|
CAPACITY
STANDARD LID:
|
Face Area
Horizontal
Vertically
Bracket to Lid
|
215 mm
395 mm
110 mm
|
|
Fuse Capacity
Options
a.
b.
c.
d.
|
12 x 63amp
8 x 100amp
4 x 160 amp DIN Size 00
6 x 63 amp + 2 x 160 A DIN
|
|
Neutral Bar
Options
a.
|
1 x 6 Way M8 or M10
Brass studs S/S nuts and S/S FW
|
LID SCREWS:
|
|
2 x M8x16 Button Head
Stainless Steel 5 mm Hex drive
|
MATERIAL:
|
|
UV Stabilised Polyethylene
|
COLOURS:
|
Base:
Terminals:
Lids:
|
Black
Red
Bronze Olive
|
E2300 Commercial Pillar
|
The higher profile option, which shares the common base of the E2000 pillar.
Suitable for multiple domestic reticulation connections or for commercial supply.
Shown fitted with 3 x 63 Amp Rexel RedSpot carriers and 1 x Jean Muller
160 Amp Horizontal DIN disconnect, size 00,
|
 |
Demonstrating the versatility of the design of the E2000 series.
This unit is shown fitted with 3 x 63 Amp Rexel RedSpot, 4 x 60 Amp
Henley Series 7 carriers plus 1 x 160 Amp Jean Muller size 00, 3-pole
horizontal disconnect, all connected with 25mm conduit cable.
|
|
Shown fitted with a Jean Muller250 Amp size 01, 3-pole horizontal DIN disconnect.
This unit utilises the same base as the E2000 Residential pillar.
All E2300 Commercial pillar use the same lid and terminal. Phase
connection bars are rated at 470 Amp.
|
|
|
