.jpg?width=2000&height=1500&name=Untitled%20design%20(77).jpg)
Fit for purpose
With the lid flush to the ground our versatile cable distribution pits are made from stabilised Polyethylene making them strong and suited to a large range of uses.
Our Range
EV1 Make Ready Termination Pit
The EV1 Make Ready Termination Pit is a small, subtle cable termination pit suited to a variety of jointing applications.
Made from 100% recycled LDPE, cable entry holes can be drilled onsite wherever they may be needed or cables may be fed in from the bottom.
The EV1 Make Ready Termination Pit is a perfect solution for future-proofing premises for future lighting or Electric Vehicle Charger installation and provide a uniform finish every time.
UP10 Underground Pit
A small underground pit designed for cable distribution. The lid is flush with the ground. The pit has provision for four cable ducts, one on each side. Cable entry holes can be cut in the base to suit the size of the ducting, or the bottom of the base removed to the required depth.
Lid Screws: The lid is retained by two M8 x 30 stainless steel screws
UP20 Underground Pit
Cable entry holes can be cut in the base to suit the size of the ducting.
Lid Screws : The lid is retained by four M8 x 60 stainless steel screws
UP30 Underground Pit (Class B)
A commonplace round service pit with the addition of a Resin Class B lid.
The security, corrosion resistance and strength of these robust mouldings ensure the
service life expected from the power industry.
UP40 Underground Pit
With a unique side wall design offering structural integrity to withstand the compaction of surrounding soil, the UP40 also offers an additional Riser to allow for fast transformation of pit height when installers require additional height in the pit.
The UP40 also offers a lockable Lid (Class A).
Cable entry holes can be cut in the base to suit the size of the ducting.
UP50 Underground Pit (Class B)
With a unique side wall design offering structural integrity to withstand the compaction of surrounding soil, the UP50 also offers an additional Riser to allow for fast transformation of pit height when installers require additional height in the pit.
Class A: Lockable LDPE Lid
Class B: Lockable Resin Lid (Lid Weight 20kg)
Cable entry holes can be cut in the base to suit the size of the ducting.
Available From Your Local Wholesaler
Latest News
